P2 motion study · Nov 2026 · Modelled, not measured

Corrected 16 Nov 2026: an independent audit of the packet behind this page found errors in the bed budget's worst cases, the battery runtime accounting, and three wordings. This page carries the corrected packet's figures throughout.

P2, worked out on paper

300 × 300 × 80

Folded size, in millimeters. It prints with the scissor open.

P2 folds into the same box as P1. The difference is where the belt plane goes: inside the rail's own height — and the 11 mm that frees up goes to heat, a shell, armor and a spool.

Modelled numbers from the public record. Nothing here is a measurement of a built P2.

01/Size & fold

Same folded box, spent differently.

P1 already folds into about 300 × 300 × 80 mm. P2 uses the same box differently: eleven millimeters come out of the pulley stack and go to heat, a shell, armor, and a spool.

Stowed section, 300 by 80 millimeters806040200scissor · shell · spoolbed10.080300 mmmm

Side section, drawn to scale. Outer height 80 mm. The dashed rectangle is P1's motion band at 21 mm. The motors sit outside this measurement and are not drawn.

Motion band

10.0mm

Freed up

11.0mm

At 10 mm the belts sit inside the rail's own height. How the thickness splits between heater, shell, armor and spool is not public. Only the sum is known: together they fit where the extra pulley plane used to be.

Folded box
7.20 L
P2 print volume
6.30 L
Print ÷ box
87.5%

Target print volume is about 6.3 L inside a 7.2 L folded box. P1's published print target is the same 6.3 L, in a shorter aspect. Print ÷ box is that target divided by the folded box. It is not the machine's size once the scissor is open, and it is not a measured packing factor.